Find out Latest News, Special Offer & many more! Enter your email NOW!!!
Glue & Epoxy
Motor & ESC
Boat & Yacht
Servo & Receiver
Gyro & Governor
Battery & Charger
Bodyshell & Paint
Tire & Wheel
T-Shirt & Cap
Who we are?
(6401-F) 1/8 MT4 G3 E-Powered Monster Truck SC - 2.4G
Our Price: RM 1,300.00
Thunder Tiger 1/8 Scale Electric Brushless Powered 4WD Monster Truck - MT-4 G3
Staging Your Truck, Monster Jam Is Now Starting !
The all-new MT4 G3 is ready to convince your neighbors that the brushless power rules! Powered by the high torque IBL-40/20 2000Kv brushless motor and twin battery packs, the MT4 G3 can pull wheelies, back flips and get air off the jump easily!
The differentials of the MT4 G3 are equipped with steel spiral bevel gears to help it handle the brutal torque of the IBL40/20 2000Kv motor. The MT4 G3ís 3mm rigid aluminum chassis and brace are securely mounted and the brace cover features vents to keep the batteries and electronicscool.
The MT4 G3 features full CVD drive shafts and high quality bearings to deliver maximum efficiency to survive from the outrageous torque and abused operation. In addition to this, the ACE RC cougar 2.4GHz radio system is also included right in the box to give you the most long-range, convenient and reliable radio control.
* Pre-Assembled Chassis
* Pre-Printed Hi-Flow Dynamic Body
* ACE RC 1:8 Car Blushless Power System
* Cougar 2.4GHz 3-CH LCD Transmitter and micro receiver
* 8kg/cm Metal Gear Steering Servo
* L Hex Wrench Set
* Cross Wrench for Changing Wheels
** Battery and Charger NOT included
Ready Set- The new MT4 G3 is offered in a completely ready to go form. All components are pre-assembled, all you have to do is to add your battery packs of choice for the clubís smack down. The MT4 comes equipped with an ACE RC BLC-150C race spec ESC and super torque 2000KV motor combo, front, rear and center CVD universals, all fluid filled differentials, 17mm wheel hubs to mach up its powerful output.
Transmission- The front and rear transmission of MT4 is the same as the nitro ST-1, which comes equipped with a hardened steel differential rings that makes stripping a gear a barely mission impossible. All the diffs contain a full set of steel diff gears and diff fluid inside in combination with full set of bearings throughout the drive train to ensure the most smooth power transmission.
Suspension- The front and rear suspension uses the same race proven composite nylon suspension arms as the nitro ST-1. The shock bodies are made of anodized aluminum with quick adjustment clips for ease of changes. The shock towers are made from 4mm thick aluminum plate with multiple shock mounting positions and the whole chassis is strongly stiffened with a compact molded chassis brace and cover. You can also fine tune for the optimal camber and toe setting with adjustable turnbuckles and suspension blocks for your demanding cornering and overall handling.
Brushless Power- The power system is equipped with a powerful 150A ESC and a 2000KV super brushless motor that will give MT4 G3 super fast speed and huge torque. But the most important thing is that the ACE RC brushless power system enables you a longer play time due to less friction in the brushless motor comparing to other RTRs. Other multiple protection features, like low voltage cut-off protection, over-heat protection, throttle signal loss protection, motor blocked protection and splash/dust proof cover are just making the ESC bullet-proof.
IBL40/20 Powerful B/L Motor:
* Outer Diameter: 40mm
* Length: 74mm
* 2000 KV
* Continuous Current: 75A
* Peak Currenty: 150A
* 5mm Heavy Duty Shaft
BLC-150C Performance ESC:
* Output: Continuous current 150A, burst current 950A.
* Input: 6-18 cells NiMH/NiCd (3300mAh or higher) or 2-6 cells LiPo.
* BEC Output: 5.75V/3A (Switch mode built-in BEC).
* Resistance: 0.0002 Ohm.
* Motor Supported: Sensorless brushless motors
Suitable Brushless Motor:
** When working with 4 cells Lipo: >= 4.5T (KV<=3000)
** When working with 6 cells Lipo: >= 6.0T (KV<=2400)
The above T number is based on the value of a 4074 sized motor(Diameter=40mm, Length=74mm)
- Suitable Car: 1/8 Buggy / Truggy / Monster Truck.
- Size: 58mm(L) * 46.5mm(W) * 35mm(H).
- Weight: 105g(Without wires)
* Warning: For Expert Drivers Only!!! We do not recommend non-previous experience user to use 6 cells Lipo on MT4 G3. Its super powerful torque can reach extreme speed and acceleration. Previous experience with higher level of skilled driving control is required. Improper operations may cause personal and/or property damage. Thunder Tiger and its distributor have no control over damage resulting from improper operation.
Technical Specifications :
Width : 434mm
Length : 532mm
Height : 240mm
WheelBase (min) : 360mm
WheelBase (max) : 365mm
Weight (battery not included) : 4180g
Final Drive : 17.9:1
Compatible with most ST-1 series parts
Heavy Duty Steel Diff Ring/Pinion
Adjustable Steel Turnbuckles
Compact Molded Chassis Brace And Cover
New Concept Monster Truck Body
CNC Machine Aluminum Motor Mount
CNC Machine Steel Pinion Gear
Equipped Front/Rear/Center CVD Drive Shafts
ACE RC Brushless Power System for 1:8 Scale Car
Center Drive Shaft Guard for Cable Protection
High Current Super Deans Plugs Included
Anodized Aluminum Oil-Filled Shocks
17mm Aluminum Wheel Hubs
Rear, center and Front Fluid Filled Differentials
S2008MG Metal Gear High Torque Servo for Steering