The
new EB-4 S3 comes
with new features that have never been applied to
a 1/8th scale nitro buggy before,
such as the super low center of gravity, radical
engineering of a car construction and more than innovative,
good looking and high performance suspension. This
a the look into the future for 1/8th scale cars and
the future is here with Thunder Tiger.
- Unique 3mm 3D T-Rex machined hardened chassis provides more
rigidity than a conventional stamp plate chassis.
- Innovative patent universal ball joint design prevents the
wear of the arm hinges for its flexible adjustments.
- Front A-arm with adjustable Pivot-Ball Suspension
- Front shocks is protected behind the shock towers and mounted
through the upper A-arm away from unexpected hits
- A7075-T6 Front/Rear shock towers and steering slider
- A7075-T6 Engine deck for easy installation
- A7075-T6 Shock absorber cap provides longer reliability
- Aluminium upper Susp. holder & CTR diff
brace
- Aluminium servo tray posts and wing posts
- AB (Anti-Bumping) shocks with 3.5mm shafts provide various
damping and rebounding
- Ultra long, light weight suspension arms
- Small transmission bulkhead with bottom seal
- Lightweight machined diff bevel gears reduce the inertia
of rotation enhancing the acceleration and The deceleration
performance
- The Non-Offset drive train decreases the loss of power transfer
from CTR diff to the four wheels to optimize the acceleration
- CNC machined dual composite heavy duty and ultra light brake
disc offers stable braking power with its anti-oil (water)
formula
- Composite material competition clutch shoes
- Light and small sized flywheel offers a stable engine operation
and acceleration.
- Non-stopping fuel system
- CNC machined, titanium look woven graphite front brace,
radio tray and center diff top plate
- Heavy duty CVD universal drive trains (Front/Center/Rear)
- Enclosed radio box protects receiver and batteries from
any foreign elements
- Laid down steering servo for low center of gravity
- Complete set of rubber-sealed ball bearings included.
- Fully adjustable Toe, Caster and Ackerman
- Adjustable anti-dive angle
|
| SPECIFICATION |
| Length |
496
mm / 19.5 inch |
| Width |
305
mm / 12 inch |
| Height |
180
mm / 7.08 inch |
| Weight |
3350
g / 74 oz, approx |
| Wheel
base |
Adjustable
from 320 mm to 330 mm |
| Front
Track Width |
Adjustable
from 295 mm to 305 mm |
| Rear
Track Width |
300
mm |
| Front
Caster |
Ddjustable
from 16 to 25 |
| Front
Anti-Dive |
-1,
0, +1 (Front Kick up:7) |
| Rear
Anti-Squat |
0,
+2, +3, +4 |
| Front
Toe |
0
widht adjustable turnbuckle |
| Rear
Toe-in |
1,
+1.5, +2, +3 |
Gearing
|
Pinion/Spur: 13:46
Primary: 3.54:1
Internal: 3.31:1
Final: 11.72:1 |
More pictures from www.sabattinicars.com
|
