Introducing the Thunder Tiger's new 3D Profile EP series !!

We are glad to introduce you the popular 3D plane. A proven 3D trainer that you can easily do any aerobatics and 3D maneuvers, includes Knife Edge, Hovering, Torque Rolls, Cobra, …etc.

Thunder Tiger's new 3D Profile EP series offers great 3D flying performance. The pre-installed carbon strips, pre-painted trim scheme, precision laser cut parts, and universal power system makes this friendly 3D machine an outstanding value. Only a few minutes of assembly are required: glue the wing, install radio gear and power unit then you are ready to Rock-n-Roll.

Item Required for Completion:

• 4CH Radio w/Mini Receiver
• 3 Micro Servos (ACE C1016 No.8117)
• Speed Controller (Ace ESC-10 No. 8015)
• 2-cell Lipo Battery (Recommend 10C Continuous Discharge)

Features:

• Factory Pre-painted Trim Scheme Pre-installed Carbon Graphite Reinforced Strips
• Photo Illustrated Manual and 3D Flying Setup Guide Included
• Perfect 3D Trainer for Beginning Aerobatic Pilots
• Perfect for Both Indoors and Outdoors
• Universal Power Unit Design with 6:1 Geared 370 motor
• 11x8 Propeller and Safely Rubber Spinner Included

EXPO 3D EP	G202 EP	Christen Eagle
Specifications: Wing Span: 31.5"(800mm) Length: 32.17“ (817mm) Wing Area: 252.3 sq.in. (16.28dm 2 ) Weight: 9.3 oz. (265g) Motor: 370 with 6: 1 Gear Radio: 4 CH, 3 Micro Servos Req'd	Specifications: Wing Span: 31.5"(800mm) Length: 32.87 (835mm) Wing Area: 258.5 sq.in. (16.68dm 2 ) Weight: 9.3 oz. (265g) Motor: 370 with 6: 1 Gear Radio: 4 CH, 3 Micro Servos Req'd	Specifications: Wing Span: 30.7"(780mm) Length: 30.9" (785mm) Wing Area: 369.8 sq.in. (23.86dm 2 ) Weight: 10.5 oz. (300g) Motor: 370 with 6:1 Gear Radio: 4 CH, 3 Micro Servos Req'd